Back to Board Index
Back to Board Index
Forum help
| FSopen server TeamSpeak 3 link Beta | |
Dave Wave   9th Jan 2013 18:38:34 |
http://www.fsopen.co.uk/software/fsopenserver2/FSopenBeta.msi If you have trouble with this file uninstall with control panel and use the normal download link. You will have a new tab for teamspeak 3. Follow these steps. 1. When you are in Teamspeak as an admin goto Tools and ServerQuery login. This will create a userid and password to enter on fsopen. 2. Your hostname is your normal address but without a port number on the end. 3. The TS3 queryport is probably always going to be 10011. 4. If the ip for your FSopen server is not whitelisted on TS3 then the connection can be banned for issuing too many commands at once (known as flooding). I've defaulted a setting of 3 commands per 10 second period. 5. Players radio coms are now listed in FSopen server. When a player changes frequency the server will look for any channel that ends with a matching number and moves him. Assuming I change my plane to 118.20 the following channel names in TeamSpeak would work. Gatwick Radar 118.2 EGPH GRND and TWR 118.200 ATC channel 1 118.20 118.2000 The following would not Gatwick Radar118.2 EGPH GRND 118.200 and TWR 125.00 Enjoy! |
Joe Clifford   9th Jan 2013 21:06:56 | Hello,
I've emailed Laurence letting him know of the update. I tested it out on my own machine with a connection to FSXMultiplay.com 's TeamSpeak, Connects and runs without any problems. No banning due to flooding. Its worth noting however, if you are not running a dedicated server and are flying on the same machine as that running the Server Software, when you change frequency you dont move channel. Not sure if you plan on including that Dave, just pointing it out incase you forgot :-) Its Good To See This Feature Being Intergrated! Thankyou |
Mattia Guatta  10th Jan 2013 00:05:38 | hi Dave, in my session, Italiani Volanti, a set all but when i click connect appaers this messagge
invalid serverID |
| Dave Wave 10th Jan 2013 00:33:01 | Please try.
1. Make a new user on your server. 2. Promote user to server admin 3. This user creates a ServerQuery login. 4. Use this userid and password. Does this work? |
| Mattia Guatta 10th Jan 2013 00:44:35 | Negative sir same error
error id=1024 msg=invalid\sserverID work only 32bit or even on 64bit?? Thanks |
| Dave Wave 10th Jan 2013 00:53:49 | Makes no difference, Is this your server or are you renting?
Please email me all the data in the log window. I will talk to you tomorrow and fix. |
| Mattia Guatta 10th Jan 2013 00:58:07 | roger Dave, what is your mail??
thanks |
| Dave Wave 10th Jan 2013 00:59:58 | dave at fsopen co uk
or private message on facebook. |
| Mattia Guatta 10th Jan 2013 01:01:27 | Ok i send the log on facebook thanks Dave |
Steff Missot  10th Jan 2013 17:24:16 | Dave,
Identify servers by port, not by serverid. command would be: "use port=" & port & "" |
| Dave Wave 10th Jan 2013 18:09:43 | Tried it Steff, no permission.
Turns out they're using an old server. even though I got past this I then hit another problem. I think they'll upgrade to fix. |
| Steff Missot 10th Jan 2013 18:29:58 | If they are running the server themselfs I'd be able to sort the permissions for them |
| Dave Wave 10th Jan 2013 18:45:31 | It's not a permission problem, they need to upgrade ts3.
|
You need to Log on to post a reply. |
Forum help